AAM Series Multi-Position Electric Air Handlers

Features and Benefits

APPLICATION VERSATILITY
Upflow or horizontal right as shipped (field-convertible for downflow or horizontal left applications). Can be AHRI matched with most brands of air conditioners orheat pumps. ETL listed for use with either R-22 or R-410A when a proper metering device is used.
LOW LEAKAGE CABINET
Less than 2% air leakage from cabinet when tested in accordance with ASHRAE standard 193. Unit must be installed according to Aspen installation instructions. Sturdy, fully insulated galvanized steel cabinet; stick pins ensure ½” insulation remains in place. Unit ships with disposable filter.
ELECTRICAL CONTROLS
Electronic Circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive style pull fuse protection on the circuit board to provide low voltage and transformer protection.
BLOWER
Direct drive multi-speed blowers circulate air quietly and efficiently. 3-speed motors allow for precise air volume selection. Motor speeds can be easily selected via motor terminals. Blowers mounted on rails so they can be easily removed for service.
DX COIL
High-efficiency rifled copper tubes/enhanced aluminum fins provide maximum heat transfer. All coils immersion tested at 500 psi then nitrogen pressurized and factory sealed for maximum reliability. Liquid-line Schrader allows pre- installation pressure testing. Available with either orifice or TXV metering device. Field-installable bolt-on TXVs are also available. Rugged GLP drain pan holds minimal condensate while eliminating the possibility of corrosion. Drain pan is UV safe. Galvanized metal drain pan with bottom primary and secondary drain connections or alternate right side primary. All connections 3/4” FPT. Access door allows for coil cleaning.
WARRANTY
Ten-year limited parts warranty