AEM Series High Efficiency Multi-Position Electric Air Handlers

Features and Benefits

APPLICATION VERSATILITY
Upflow or horizontal right as shipped (field-convertible for downflow or horizon- tal left applications). Can be AHRI certified with most brands of air conditioners or heat pumps. ETL listed for use with either R-22 or R-410A when a proper metering device is used.
MOTOR
Constant torque ECM speeds and torques are controlled by software embedded in the motor to maintain constant torque. Motors are pre-programmed at the factory.
LOW LEAKAGE CABINET
Less than 2% air leakage from cabinet when tested in accordance with ASHRAE standard193. Unit must be installed according to Aspen installation instructions. Sturdy, fully insulated galvanized steel cabinet; stick pins ensure 1/2” insulation remains in place. Unit ships with disposable filter.
BLOWER
Direct drive blowers circulate air quietly and efficiently.Motor speeds and torques programmed in the motor. Blowers mounted on rails so they can be easily removed for service.
ELECTRONIC CIRCUIT BOARD
Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive-style pull fuse protection on the circuit board to provide low voltage and transformer protection.
MODULAR ELECTRIC HEAT KITS
Heat kits available with either circuit breakers or terminal blocks. Available from 3 to 25 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation. Modules are easily installed in the field using molex plugs or can be ordered factory-installed. Controls are accessible from the front for easy service. Electrical connections can be made from the top or left. Disconnect does not protrude through the wall panel. Fan time delay relay standard for increased efficiency.
DX COIL
High efficiency rifled copper tubes/enhanced aluminum fins provide maximum heat transfer. All coils immersion tested at 500 psi then nitrogen pressurized and factory sealed for maximum reliability. Liquid-line Schrader allows pre-installation pressure testing. Available with either orifice or TXV metering device. Field-installable bolt-on TXVs are also available. Rugged, UV safe, GLP drain pan holds minimal condensate while eliminating the possibility of corro- sion. All drain connections are 3/4” FPT. Access door allows for coil cleaning.
WARRANTY
Ten-year limited parts warranty.